Heaters are engineered for longevity in continuous critical cleaning and rinsing environments. Heaters are designed to be used individually or in series. Wide range of flow rates can be accommodated with complete line of standard and custom heater controllers.
De Ionized Water Heaters and Controllers
Stainless Steel
Temp- 80°C to 150°C
Flow rate- 15 or 25 SCFM
Power- 120 or 200-240 AC
Gas inline heater
PFA- flow path gas heater, shown with controller
Temp- 80°C to 150°C
Flow rate- 15 or 25 SCFM
Power- 120 or 200-240 AC
Gas inline heater
Stainless Steel
1Kw-12Kw
Temp up to 150°C
Power- 120-480 VAC, single phase
inline di water (de ionized water ), chemical inline heater
PVDF- Housing with PFA jacketed coil (patented)
1Kw-12Kw with mounting bracket
Liquid level, process, high temp, ground, overtemp TC
Temp up to 150°C
Power- 120-480 VAC, single phase, three phase
Inline DI water, chemical heater, deionized inline water heater
PFA- Housing with PFA jacketed coil (patented)
1Kw-12Kw with mounting bracket
Liquid level, process, high temp, ground, overtemp TC
Temp up to 150°C
Power- 120-480 VAC, single phase, three phase
Inline DI water, chemical heater, deionized inline water heater
Quartz Heaters – Best quartz heater on the market as stated by satisfied key customers, (patented) fast ramp up design
5Kw to12Kw
Minimum Flow rate- .2 GPM
Temp- up to 180°C
Power- 208, 220, 230 or 400 VAC, 3 Phase
DI water, chemical heater
PFA- Housing with PFA jacketed heating coil (patented)
PFA wetted path for cooling.
For precise temperature control requirements
Liquid level, process, high temp, ground, overtemp TC
1Kw-3Kw with mounting bracket
Temp up to 150°C
Power- 120-480 VAC, single phase, three phase deionized water,
DI water and chemical
PFA- Housing with PFA jacketed heating coil (patented)
PFA wetted path for cooling.
For precise temperature control requirements
Liquid level, process, high temp, ground, overtemp TC
1Kw-3Kw with mounting bracket
Temp up to 150°C
Power- 120-480 VAC, single phase, three phase deionized water,
DI water wall mount and chemical
PFA- Grid Heaters for use in tanks
J type thermocouple, additional can be provided
Optional perforated top or bottom plates
Temp- 200°C range based on Kw
Power- 120, 208, 220, 230 or 240 VAC
PFA- Frame Heaters for use in tanks
J type thermocouple, additional can be provided
Optional perforated top or bottom plates (shown in picture)
Temp- 200°C range based on Kw
Power- 120, 208, 220, 230 or 240 VAC
PFA - Fence Heaters available consult for more information
Quartz Tank- Bath Heaters
with or without drain, recirculation and custom
One piece quartz construction, rotomolded PVDF outer enclosure, 3 thermodisc sensors, type J thermocouples, PFA wiring used throughout
SX-
Stainless Steel D.I. water
heater
Incoloy heating elements
Large Capacity D.I. water heater
24Kw to 144Kw
Power- 240 or 480 VAC, 3 Phase
de ionized water heater
Ideal for requirements with space limitations
Poseidon- Passivated 316 L Stainless Steel
Large capacity D.I. water heater
24Kw to 144Kw
Power- 240 or 480 VAC, 3 Phase
Aquarius- PVDF Modules
Large capacity D.I. water heater
Point of use
20Kw to 200Kw
Flow rates- 0.5 to 13.0 GPM
Power- 480 VAC, 3 Phase
Juno- Quartz Modules
45Kw to 135Kw
Flow rates- 2.2 to 10.6 GPM
Power- 380, 400 or 480 VAC, 3 Phase
de ionized water heater, deionized water heater
(steam as heat source)
Fluidix- Stainless Steel, PVDF or PFA exchanger and wetted path
Flow rate- 15-50GPM
Temp- 20-91°C
Approx 200Kw to 800Kw
Complete selection of liquid and gas controllers based on customer requirements
Range of voltages, communications, response rate, I/O
Controller boxes NEMA rated and matched to meet your process needs. Safety interlocks to protect heaters during catastrophic process events
